how to get steps out of above ground pool

Removing steps from an above-ground pool is a straightforward process. Here’s how you can do it:

Materials You’ll Need:

  • A helping hand (someone to assist you is recommended).
  • A screwdriver or drill with the appropriate bits.
  • A wrench or pliers.
  • Safety goggles (for eye protection).

Steps to Remove the Pool Steps:

  1. Safety First: Before you begin, ensure the pool’s filtration system is turned off, and there is no electricity around the pool area. Put on safety goggles for eye protection.
  2. Drain the Pool: If the pool still has water, you’ll need to drain it to below the level of the pool steps. You can use a submersible pump or a hose siphoning method to do this.
  3. Access the Step Mounting Hardware:
    • Locate the mounting hardware that secures the pool steps to the pool wall. This is usually located on the outside of the pool, just below the waterline.
    • You may need to remove a cover or panel to access the screws or bolts that hold the steps in place.
  4. Unscrew or Unbolt the Steps:
    • Using a screwdriver or drill with the appropriate bit, start unscrewing or unbolting the mounting hardware that secures the pool steps. Be sure to keep track of all screws, bolts, and washers as you remove them.
  5. Disconnect Any Latches or Clamps:
    • Some pool steps may also be secured with latches, clamps, or additional hardware on the inside of the pool. Carefully disconnect any such attachments.
  6. Remove the Pool Steps:
    • With the mounting hardware and any additional attachments removed, carefully lift the pool steps out of the pool. If the steps are large or heavy, it’s a good idea to have a helper assist you in lifting them out.
  7. Inspect the Pool Wall:
    • After removing the pool steps, inspect the pool wall to ensure there is no damage or wear caused by the steps’ attachment points.
  8. Store the Steps Safely:
    • If you plan to use the pool steps again in the future, store them in a dry, secure location to prevent damage or deterioration.
  9. Restore the Pool Area:
    • If you’re not planning to use the steps again or if you’re closing the pool for the season, you can now complete any necessary pool winterizing procedures or return the pool area to its usual state.

Remember to follow any specific instructions provided by the manufacturer of your pool steps, as designs and installation methods can vary. Additionally, exercise caution and enlist the help of a friend or family member when lifting or maneuvering heavy pool steps to avoid injury.

Also Read:

Related Articles

Leave a Reply

Back to top button